Many friends may not feel strange when it comes to pneumatic ball valves. Especially in recent years, with the increasing application scope of pneumatic ball valves, problems of one kind or another will inevitably occur during their use. So what is the cause of the failure of the pneumatic ball valve? How can we better avoid these situations? Here is a brief introduction.
1. Generally speaking, if the same problem often occurs with the pneumatic ball valve, it is necessary to see how its design scheme is and whether there are certain loopholes. If there are certain defects in the design process, such as the consideration of pressure is not particularly thorough, it will also affect the quality of the pneumatic ball valve.
2. Material problems Secondly, if the design process of the pneumatic ball valve is found to be correct during the maintenance of the pneumatic ball valve, we need to see how the material selection of the pneumatic ball valve is. If its pressure resistance, stability or service life are not particularly good, we also need to see whether there is a quality problem of the material, If the selected material cannot meet the use requirements of the pneumatic ball valve, then naturally the service life is not particularly good. In general, pneumatic ball valves, as a very important part of machinery and equipment, can easily cause various problems if the product quality is not well understood. In order to better solve these problems, we should also pay attention to whether there are quality problems with raw materials when selecting pneumatic ball valves.