Panjin EPDM valve pneumatic ball valve is reliable. The expansion effect of the manufacturer occurs in the transverse direction, while the expansion joint can only affect the stress of the string in the longitudinal direction. The expansion effect of the tubing string in gas wells with or without expansion joints is the same under various working conditions. Therefore, in the later analysis, the action mode of axial force and three-dimensional stress on the tubing string is mainly discussed. When setting, the tubing string should be pressurized first. During the pressure holding process, the tubing string at the wellhead is subject to the downward tension caused by the tubing weight and oil pressure. During this process, whether there is an expansion joint or not has little impact on the force on the tubing string at the wellhead. However, after the packer is set, the expansion joint can compensate for deformation and reduce the pressure of the tubing at the wellhead. Pneumatic ball valve is also called valve pneumatic ball valve, flexible pneumatic ball valve, flexible pneumatic ball valve, valve shock absorber, etc. The product is mainly composed of tubular valve parts composed of inner and outer rubber layers, cord layers and steel wire rings, which are vulcanized at high temperature and high pressure and then combined with metal flange loose sleeves. It is widely used in fire protection, chemical industry, pump valve and other pipeline systems, playing the role of earthquake resistance and noise reduction, and absorbing the displacement generated during pipeline operation.
Precautions for installation of pneumatic ball valve of valve: 1. The installation length of pneumatic ball valve is calculated based on the outside of the valve sealing surface at both ends of the ball, and the product flow direction is not divided;
2. It is forbidden to conduct hydraulic test when the connecting bolts of each part are not fastened;
3. It is forbidden to open the connecting bolt between the pneumatic ball valve and the pipeline during the water pressure test and operation stages;
4. It is prohibited to pre stretch the installation beyond the natural length of the pneumatic ball valve;
5. The pipeline must be provided with fixed support or fixed bracket, and the force of the fixed bracket must be greater than the axial force. During vertical installation and overhead installation, corresponding fixed supports and forced supports shall be installed at both ends of the product to prevent pulling off under working pressure.