The pneumatic ball valve is powered by compressed air, so the pneumatic ball valve often shows air leakage in the process of application. Let's take a look at the causes of air leakage of pneumatic ball valve.
1. The exhaust hole of the cylinder leaks because the two moving parts inside the cylinder and the sealing ring of the cylinder block are aging.
2. The upper and lower parts of the cylinder leak, because of the frequent activity of the sealing ring between the actuator and the cylinder and its actuator, the sealing effect is not achieved.
3. The solenoid valve on the cylinder leaks, which may be caused by the high pressure of the pressure reducing valve.
4. The tension spring in the cylinder is damaged, which causes the cylinder to leak.

This is because the manufacturer has not made the electric ball valve very powerful in terms of technology. Finally, the performance of its manufacturer in terms of production equipment. First of all, for its products, when they are produced, they also want to make it reach the maximum production process. However, if the manufacturer does not have good equipment strength, Of course, it is not very good in terms of product transfer.