Cylindrical hanger spring damper
There are many kinds of spring shock absorbers, one of which is known as the hanging spring shock absorber, and there are many different types of shock absorbers in the hanging spring shock absorber. However, there are only two popular ones in the market, namely, cylindrical suspension spring damper and frame fan suspension spring damper. Let's understand the cylindrical suspension spring shock absorber.
Cylindrical hanging spring shock absorber is mainly composed of metal springs and certain damping data. It has the functions of low frequency, large damping, wide application range and obvious vibration isolation and noise reduction effect.
The hanging spring shock absorber of frame type fan has a color appearance and is used for vibration reduction of various pipes and fan coils, fresh air units, variable air volume air conditioning boxes, axial flow fans, etc. It is a combination of vibration isolation and noise reduction components in series with steel spring and rubber.
It is used for hoisting and vibration reduction of various pipes and fan coil units, fresh air units, variable air volume air conditioning boxes, axial flow fans, etc.
The device is convenient, and the lateral damping block is used to increase the vertical damping coefficient and improve the longitudinal and transverse rigidity. According to different data, it can be made into various types, such as acid resistant, alkali resistant, corrosion resistant, high pressure resistant, heat resistant, and adapt to a variety of media and environments. The materials are purchased according to the national industry standards, with good quality, long service life, and easy device maintenance, but prevent contact with sharp metal devices, so as not to damage the product. If it is used overhead, it can be equipped with elastic support, and the bolts shall be tightened by diagonal method during installation. If the pipeline pressure is too high, the corresponding shock absorber shall be used. If other specifications are used, they can be clarified separately.

4. The tiny bubbles containing mixture mixed into the bubbly flow can still work normally, but the measured flow rate of the mixed volume containing the bubble volume is that the gas content increases to form a bullet (block) flow, and the electrode may be covered by gas to make the circuit break instantaneously, resulting in output shaking or even failure to work normally.