How to Promote Spring Shock Absorber in Automobile
We all know that the promotion of spring shock absorber in cars is actually to replace the spring shock absorber. In fact, not all cars are suitable for replacement. Because the main decision to find a suitable spring shock absorber is whether you want to be warm or functional, or the normal road conditions, and the level of acceptance of cars. These factors should be considered. The upgrading of spring shock absorber refers to the replacement of spring shock absorber. A suitable spring shock absorber is usually a spring shock absorber with good quality that can fully match with the spring. The difficulty of selecting a spring damper is to find a good point between the soft and warm driving state and not affect the driving control.
In general, racing spring shock absorbers pay more attention to the control effect, but the warm effect is not good; Ordinary cars are just the opposite. Therefore, a spring damper with adjustable damping is required to deal with this problem.
Since the elastic coefficient of the spring is fixed, the hardness of the spring cannot be changed by adjusting the spring itself. The appearance of adjustable spring shock absorber can just compensate for the defect that the hardness cannot be adjusted. Adjusting the damping of the spring shock absorber is also equivalent to hardening the spring. Since hardening the spring shock absorber is much easier than changing the spring, there are now so-called electronic high-speed spring shock absorbers. Simply operating the knob in the car can change the damping at will to achieve the effect of fine tuning the suspension setting.
In high-performance vehicles, it is common to use a relatively hard spring damper. If the spring shock absorber is too soft, the body will shake. If it is too hard, that is, too much damping to the spring may cause the spring to fail to work properly. Since the shock absorption installation manufacturer usually does not provide detailed technical materials for the product, it is only occasionally attempted to set the suspension for five vehicles. According to experience, the most suitable suspension configuration for the road is to use a softer spring (of course, progressive), coupled with a harder adjustable spring shock absorber, to compensate for the lack of spring hardness with the hardness of the spring shock absorber, coupled with a freely adjustable damping spring shock absorber, to achieve a high degree of driving compliance.
It can be said that not all spring shock absorbers are suitable for promotion. Sometimes promotion is a burden.

Precautions for installation and application of stainless steel hose
1. The corrugated pipe of stainless steel hose is made of chrome nickel austenitic stainless steel. Pay attention to prevent pitting corrosion of nitrogen ions and corrosive damage of dilute sulfuric acid and dilute sulfuric acid during operation.
2. After the user suspends the hydraulic test on the equipment and pipeline system with stainless steel hoses, it shall prevent the impact of rust blocks and the accumulation of sediment containing chloride ions, which may cause corrosion and mechanical damage.
3. During installation, the pneumatic butterfly valve shall be protected from splashes and mechanical damage during welding, otherwise it will cause leakage.
4. The sealing pipe system shall strictly comply with the safety operation regulations to prevent the overpressure caused by improper operation or other factors from causing the hose to pull off or burst.
5. Please carefully digest the examples of stainless steel hose installation methods, and strictly follow the correct sketch for installation and application.