The manufacturer of pneumatic butterfly valve introduces you to the question of spring pneumatic butterfly valve?
The primary school of the pneumatic butterfly valve manufacturer introduced you to the spring pneumatic butterfly valve. Do you know what the spring pneumatic butterfly valve is used for? You may not be so clear, so I want to introduce you to the knowledge about spring pneumatic butterfly valve, so that you can understand these contents more clearly. The contents of pneumatic butterfly valve manufacturer are as follows:
Spring pneumatic butterfly valve is a vibration control device sensitive to displacement response. Spring pneumatic butterfly valve is mainly used for anti vibration of pipelines and equipment in nuclear power plants, thermal power plants, chemical plants, steel plants, etc. It is often used to control the vibration of pipeline system caused by fluid vibration excitation (such as fluid pulsation, two-phase flow, high-speed flow, aeolian shock, etc.). The spring pneumatic butterfly valve can effectively control the vibration and swing of various frequencies, but it limits the normal thermal displacement of the pipeline to a certain extent. The additional force generated by the spring pneumatic butterfly valve on the pipeline shall be fully considered in the design. In the past, the spring shock absorption has a very high technological content, which can apply the technology developed from time to time, so that many projects will be stopped under more satisfactory conditions, so that more equipment can extend the service life in a more stable environment, and ensure the safety of application.
The above content is the elementary question that our pneumatic butterfly valve manufacturer introduced you to the spring pneumatic butterfly valve. I believe that after understanding the above content, you have a very good understanding of the spring pneumatic butterfly valve! Thank you very much for your support! We will continue to update more information about pneumatic butterfly valves. Welcome to our website. If you have any unclear information, please contact Songxia Pneumatic Butterfly Valve Co., Ltd., and we will be happy to serve you!

Troubleshooting of leakage at both ends of pneumatic butterfly valve
1. Sealing gaskets on both sides fail
2. The tightening force of pipe flange is uneven or not compacted
3. The upper and lower sealing gaskets of the sealing ring are invalid