After installing the light steel keel, it is also necessary to install the electric butterfly valve. Of course, the electric butterfly valve should be fixed at the fixed spacing with rivets. At the same time, the electric butterfly valve should also be connected with the keel, so as to have a good valve function. If you want to know about the installation process of the electric butterfly valve with light steel keel, you can contact our light steel keel manufacturer, The expertise of light steel keel electric butterfly valve we will introduce to you Shanghai Dongfeng Pump Valve Factory is committed to the research, development and production of suspended butterfly valve electric butterfly valve, butterfly valve electric butterfly valve, seat mounted fan electric butterfly valve and other sound insulation and noise reduction projects. With rich industry experience, you are welcome to call
What are the performance characteristics of the wall electric butterfly valve? In order to reduce the vibration and impact of the road surface mentioned above, the butterfly valve is needed to absorb the energy of vibration and impact. The butterfly valve is an energy storage element in the suspension, but it is not enough to store it for the time being. It is also necessary to consume the energy that is bad for the ride comfort and handling stability of the vehicle. This is the turn of the wall electric butterfly valve, The working principle of the hydraulic wall electric butterfly valve is that when the frame and the axle reciprocate in relative motion, and the piston reciprocates in the cylinder barrel, the oil in the wall electric butterfly valve housing will repeatedly flow from one inner cavity to another through some narrow pores. At this time, the friction between the hole wall and the oil and the friction within the liquid molecules will form the damping force for vibration, The vibration energy of the body and frame is converted into heat energy, which is absorbed by the oil and the wall electric butterfly valve housing, and then dispersed to the atmosphere
In short, if the wall electric butterfly valve runs continuously for several minutes on the test bench, the outer wall of the wall electric butterfly valve storage cylinder will become very hot, even hot