Pneumatic ball valve factory tutor you to check the working efficiency of pneumatic ball valve?
Pneumatic ball valve can effectively prevent the car from shaking! Of course, if the pneumatic ball valve is not good, or the work efficiency is not high, there will be problems! Therefore, I will analyze how to check the working efficiency of pneumatic ball valve for you!
1. First, you can drive at a low speed, and then brake suddenly. If you find that the car shakes violently and the human body feels uncomfortable, then there is a problem with the pneumatic ball valve.
2. Press the bumper firmly, and then release it. If the car jumps 2-3 times, the pneumatic ball valve works well.
3. Stop the car after driving 10km on the road with poor road conditions, touch the shell of the pneumatic ball valve with your hand. If it is not hot enough, it means that there is no resistance inside the pneumatic ball valve, and the pneumatic ball valve does not work. At this time, you can participate in the appropriate lubricating oil and then stop the test. If the shell is hot, the pneumatic ball valve is short of oil inside, and you should add enough oil; Otherwise, the pneumatic ball valve is invalid.
4. Dismantle the pneumatic ball valve to make it upright, clamp the lower connecting ring on the bench clamp, and pull and press the shock absorber rod several times with force. At this time, there should be stable resistance. The resistance of pulling upward should be greater than the resistance of pressing downward. If the resistance is unstable or no resistance, it may be the lack of oil inside the pneumatic ball valve or the damage of valve parts, and the repair or replacement of parts should be stopped.
Through the above four methods! We can effectively test whether the pneumatic ball valve is good or bad, and the best pneumatic ball valve is of course! The above content is organized and reported by the small editor! If you need to reprint this article, please indicate the source, thank you for your support!