The pneumatic ball valve is installed to reduce vibration by changing the disturbing force of the vibration source or the transmission characteristics of the system. Pneumatic ball valves are classified from the point of view of raw materials for resistance. They are mainly divided into hydraulic pneumatic ball valves and hydraulic pneumatic ball valves. There is also a pneumatic ball valve with variable resistance.
Any pneumatic ball valve has its limitations. For example, in many cases, the pneumatic ball valve cannot be used for vibration isolation of machines with similar frequencies, and the air cushion pneumatic ball valve may not be used for vibration isolation of on-board equipment. But this does not mean that they have no valve effect, only that they are not suitable for some occasions. The same is true for pneumatic ball valves. Pneumatic ball valve is suitable for high-frequency vibration equipment, and also suitable for some types of stamping vibration. The effect is very good! Finally, many pneumatic ball valves on the market only have the appearance, not the inside! Their design premise is not designed according to the vibration reduction requirements at all. Such products cannot be called pneumatic ball valves at all, which is the root cause of the deterioration of pneumatic ball valves.
Finally, pneumatic ball valves are widely used;
To sum up, we should not misunderstand that pneumatic ball valves have no damping effect. If it does not achieve the desired effect, it must be that you have not selected the pneumatic ball valve that is suitable for you.