How to adjust if the common specifications and models of the wafer type pneumatic butterfly valve cannot be closed properly? What is the normal operating ambient temperature of pneumatic ball valve?
1. The direction of the hydraulic support rod is generally opposite, and the correct device can reduce the cushioning friction, so as to better show the cushioning effect.
2. First of all, the pneumatic ball valve device and the hydraulic support rod device should be aligned to the device point, which is based on the weight of the object to be supported to calculate the details of the device. This is very important. It is also important to align the centerline of the device object, otherwise, the hydraulic support rod will not support.
3. The pneumatic ball valve device should also pay attention to that the hydraulic support rod is a functional support object, which cannot be used as an ordinary object. It should be an accurate device to complete its own functions as far as possible.
4. The pneumatic ball valve has the sealing performance, so we try not to destroy the rod itself artificially and do not heat it at high temperature. Because it is filled with high-pressure gas, it is better not to stop refitting the rod under the support of the rod. 5. Because the latter can only play its role under certain conditions, the operating ambient temperature is best between - 36 ℃ -+72 ℃.
6. It is suggested to use a sensitive spherical device head in the application direction, because the spherical head can rotate freely
7. It is better to install after reading the manufacturer's product application instructions. Since the manufacturer provides some good device methods to summarize the above ideas, we should determine the hydraulic support rod device and pneumatic ball valve device according to our own practice, and only the correct application methods can give full play to the best characteristics.
