The shock absorber is a favorite in the shock absorber market at present. Its powerful shock absorption effect and sound insulation effect are the first choice of many engineers. It can be said that its popularity is because the raw materials and structure it needs are much simpler than other types of shock absorbers, and its cost is relatively low. At present, natural rubber, neoprene rubber and butadiene rubber are the mainstream for the production of shock absorbers. The market is full of shock absorbers made of recycled rubber, which are hard to handle without ball valve performance, nonlinear load compression ratio, rough surface, poor damping effect and easy to aging. This type can be eliminated!
Application scope of shock absorber: First, vibration isolation and noise control of high-frequency rotating mechanical equipment. For example: for fans, water pumps, generator sets, air conditioning hosts, etc., vibration dampers should be used when the rotating frequency of mechanical equipment should be greater than 1000 revolutions; The impact frequency of stamping equipment should avoid the natural frequency of shock absorber. Example: punch, die-cutting machine, press, etc;
Its existence will greatly reduce many vibration effects; Not only the vibration is reduced, but also the accompanying noise is reduced. For all pneumatic ball valves on the market, the degree of reduction can be said to be; Because it is an ideal valve material, it has damping effect on vibration; The compressive strength of is much greater than the tensile strength. The tensile length is generally 6 times larger than the compression distance. The natural vibration frequency is different under tension or compression; It has great linear flexibility, can be almost stretched to fracture without losing its elasticity, and can withstand alternating stress without fatigue; Like water, it is almost incompressible, and will only produce elastic deformation after compression, but its volume is unchanged;
There are also quite a few types of pneumatic ball valves available in the market, including valve gaskets. For example, the low-frequency composite pneumatic ball valve is a typical one; Components of low-frequency composite pneumatic ball valve: made of metal and composite.
If the metal surface is completely covered, it can effectively prevent metal corrosion. The natural frequency of the product is low, so the damping ratio is appropriate. If the horizontal stiffness is higher than the vertical stiffness, it is suitable for horizontal, inverted, side hung and other installation forms. Good lateral stability when used in the horizontal state; The pneumatic ball valve has a very obvious valve function, which can automatically limit protection when it bears a large impact. At this time, if it has a strong ability to respond to the common peak at the same time, it can respond to the transient impact, and the self vibration energy caused by the transient excessive working conditions can quickly disappear, and the equipment will not have any shaking;
Pneumatic ball valves are widely used in many industries. They can not only have quite obvious vibration isolation effect in a wide range of interference frequencies, but also can be applied to all kinds of land and marine mechanical equipment, such as diesel engines, fans, water pumps, air compressors, air conditioners, precision instruments and meters and other small and medium-sized mechanical equipment. Good isolation effect can also be achieved for mechanical equipment with horizontal disturbing force.
Ball valve dampers are used more and more widely, and more and more products are introduced, especially industrial pneumatic ball valves, such as pneumatic ball valves, pneumatic ball valves, fan pneumatic ball valves, etc. Its position in the industry has gradually emerged, and it has begun to play a decisive role. The reason why the pneumatic ball valve can continue to develop in the pace of the times lies in its strong foundation and outstanding renewal potential.
Although the main position of the pneumatic ball valve market has gradually emerged over the years, it has a long history and was born in the face of traditional industry. Ball valve pneumatic ball valve is divided into ball valve pneumatic ball valve, pneumatic ball valve and air damper. According to the use, it can be divided into fan damper, pump damper, compressor damper, generator damper, etc. Since its establishment, it has become an extremely important part of the machinery field, large, medium and small machinery. The product has the auxiliary effect of improving function and maintenance. Therefore, from the traditional perspective.
The application of pneumatic ball valve has already penetrated into the global machinery field. Damping, noise reduction, and maintenance of human living environment have become an indispensable part of mechanical products. From the high-tech point of view, the pneumatic ball valve is also extremely high-tech, and can use continuous technology, so that many projects can be carried out under more perfect conditions, so that more equipment can be extended to a more stable environment.