Summarize the technical methods of Jingjiang double flange electric ball valve to deal with the flow of water channel. Jingjiang double flange electric ball valve is composed of body, seal ring, gland, telescopic spool and other main parts. The product is suitable for pipes connected with flanges on both sides. When installing, adjust the length of the device between the two ends of the product and the flange. Raise funds diagonally and tighten the gland bolts evenly to make it a whole, with a certain displacement, so that the device can be adjusted according to the site size when it is repaired.
During operation, the reverse axial thrust can be transmitted to all pipelines. The double flange electric ball valve has certain anti penetration effect, which can prevent water from seeping, flowing and flowing to the lower layer. In the room with water, the casing height in the room with water (kitchen, toilet, etc.) shall be 50mm higher than the survival ground, and the casing of the plastic water supply pipe shall be 100mm higher than the survival ground.
It shall be sealed tightly with ointment. After analysis, our technicians have summed up two ways to deal with water flowing: one is that the height of the casing is low; Second, although the height is enough, the casing opening is not tightly sealed. The treatment method is very simple. Due to the limitation of conditions, the clear distance from the outdoor water supply pipeline to the septic tank is less than the specification requirements. It is also necessary to add a casing pipe to the water supply pipeline, and the length should comply with the planning requirements. When restricted by conditions, it is necessary for indoor water supply pipeline to pass under the drainage pipeline, it is necessary for the water supply pipeline to set a sleeve whose length should not be less than the planning request to prevent water pollution.