Electric ball valve can also be called flexible electric ball valve, electric ball valve, electric ball valve, flexible electric ball valve, valve expansion joint, electric ball valve, shock absorber, etc. It is a pipe connector with high elasticity, high air tightness, medium resistance and weather resistance.
The electric ball valve is generally composed of an inner rubber layer, a fabric reinforcement layer (the reinforcement layer has multiple layers of rubber scraped nylon cord fabric), a middle rubber layer, an outer rubber layer, an end reinforced metal ring or a steel ring, which is formed by vulcanization at high temperature and pressure, and loosely combined with a metal flange or a parallel joint. This product makes use of the advantages of the valve, such as high elasticity, high air permeability, medium resistance, weather resistance and radiation resistance, which can reduce the vibration and noise of the pipeline and compensate for the expansion and contraction caused by temperature changes. The valve materials used vary according to the media, including natural rubber, styrene butadiene rubber, butyl rubber, butyl rubber, EPDM, neoprene rubber, silicon valve, fluorine valve, etc. It has the functions of heat resistance, acid resistance, alkali resistance, corrosion resistance, abrasion resistance, oil resistance, etc. Casing expansion joint is composed of inner and outer casing which can make axial relative movement. The stuffing box is used for sealing between the inner and outer casings.
Keep the tubes at both ends moving on the same axis during use. The product is mainly composed of sleeve (core tube), shell, sealing material, etc. It is used to compensate for the axial expansion and contraction of the pipe and the axial rotation at any angle. It has the characteristics of small volume and large compensation amount, and is suitable for hot water, steam, grease and other media. The sliding movement of the outer sleeve through the sliding sleeve can compensate for thermal expansion. Technical standards: products shall be marked in the following order: product code, type code, structure code, performance code, working pressure, nominal diameter.