Non electric ball valves are commonly used in desulfurization pipeline projects. Compared with electric ball valves, the advantages are: under the same length, the compensation amount of non electric ball valves is greater than that of electric ball valves; The replacement and maintenance are convenient. If the frame of the non electric ball valve is not damaged, only the non fabric skin can be replaced; Under normal operating conditions, the cost of non electric ball valve is lower than that of electric ball valve. The composition material of non electric ball valve for desulfurization pipeline depends on the temperature and corrosion cleaning of desulfurization pipeline:
1) Under normal temperature and without corrosion, if there is no special requirement, the non electric ball valve can be in the form of non diversion cylinder, which is easy to install and replace;
2) In case of corrosion at normal temperature, the non electric ball valve is generally in the form of a draft tube, and the fabric skin is made of corrosion-resistant materials to increase its service life; During installation, pay attention to the medium flow direction mark marked on the diversion drum;
3) Under the condition of high temperature and no corrosion, the non electric ball valve shall adopt a special structure resistant to high temperature to absorb the thermal displacement of the pipeline;
4) In case of high temperature and corrosion, the non electric ball valve shall adopt a special structure resistant to high temperature and corrosion, which not only compensates the thermal displacement generated by the pipeline, but also reduces the corrosion caused by the flue gas. One thing to be noted here: the outer layer of non electric ball valve - non fabric skin part needs to be protected, whether during transportation or on-site construction.