The important factor of the service life of electric ball valve The electric ball valve is slightly more complex than the conventional product in structure. If it is not properly maintained in application, the service life of the product will further decline. So in this article, we introduce the important factors that affect the service life of the product, and guide you to correctly install and use this new product, To help people better understand this new product, apply it in a reasonable space, and the effective service life of the product. The electric ball valve is made by adding a flange stub pipe and a force transmitting screw on the basis of the flange loose sleeve compensation joint. The difference between the secondary type of compensation joint and the loose sleeve compensation joint and the loose sleeve limit compensation joint is that its compensation amount refers to the adjustment amount during installation and disassembly. Once all nuts are tightened, it is rigidly connected and can transmit the axial force to protect the valve Pumps and other equipment. The electric ball valve is suitable for conveying sea water, fresh water, cold and hot water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, product oil, air, gas, steam and granular powder with temperature not higher than 250 degrees. During the application of the electric ball valve, the appropriate length should be customized according to the installation and use conditions on the project site to avoid the stress on the expansion transmission parts of the product and the performance degradation of the product itself during the on-site installation and use. This problem is most common in the installation and use of various electric ball valves.
Secondly, in a reasonable use space, we should make reasonable anti-corrosion for the use of electric ball valves. We should regularly use special anti-corrosion materials to effectively prevent loose electric ball valves from falling in technical indicators due to the harsh use environment of the products.