How does the double flange electric ball valve transmit force in pipeline operation? The double flange power transmission connection is mainly used for the connection of pumps, valves and other accessories. It is composed of electric ball valve, short pipe flange, force transfer screw and other components. It can transfer the pressure thrust (blind plate force) of the connected parts and compensate the pipeline error, and cannot absorb the axial displacement. It is important to connect pumps, valves, pipelines and other accessories.
Function introduction of double flange electric ball valve: the electric ball valve is made by adding a flange stub pipe and a force transmission screw on the basis of the flange compensation joint. The difference between the secondary type of compensation joint and the compensation joint and the limit compensation joint is that its compensation amount refers to the adjustment amount during installation and disassembly. Once all nuts are tightened, it is rigidly connected and can transmit axial force, So as to protect valves, pumps and other equipment. Scope of application of double flange electric ball valve: C2F/VSSJAF double flange electric ball valve is suitable for conveying seawater, fresh water, cold and hot water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, product oil, air, gas, steam and granular powder with temperature not higher than 250 degrees.
Brief description of installation of double flange electric ball valve: C2F/VSSJAF double flange electric ball valve is applicable to pipes connected with flanges on both sides. During installation, adjust the installation length of both ends of the product and flanges, and tighten the pressure bolts diagonally and evenly to make it a whole with a certain displacement, so that it can be adjusted according to the site size during installation and maintenance, The axial thrust can be transmitted to the whole pipeline. When installing in the pipeline where both sides of the double flange electric ball valve are connected to the flange, adjust the installation length of both ends of the product and the flange, tighten the gland bolts diagonally and evenly, and use them to form a whole with a certain displacement to facilitate installation and maintenance, and adjust according to the site size. During operation, the reverse axial thrust can be transmitted to the whole pipeline.