The valve materials used vary according to the media, including natural rubber, styrene butadiene rubber, butyl rubber, butyl rubber, EPDM, neoprene rubber, silicon valve, fluorine valve, etc. It has the functions of heat resistance, acid resistance, alkali resistance, corrosion resistance, abrasion resistance, oil resistance, etc. If it is right, don't care what others say, it can only affect your judgment; If you need hard work, don't be stingy with your efforts. There has never been a real success and you can grow effortlessly in the weeds; If the pay is not equal to the gain, there is no need to complain too much, which will make your heart more tired; If we face a complete failure, we don't have to be true to our destiny. We will have many difficulties in the afterlife. Technical standards: products shall be marked in the following order: product code, type code, structure code, performance code, working pressure, nominal diameter. The product and structure codes are specified as follows: flexible pneumatic ball valve RFJ, single ball valve D, double ball valve S, elbow W, concentric reducer Yt, eccentric reducer Yp, fan coil connector F. Mark example: RFJD-1.6 × 200,.
It refers to a single spherical flexible pneumatic ball valve with a nominal diameter of 200mm, and the working pressure is 1.6Mpa. Working pressure: the test pressure of the pneumatic ball valve is 5 times of the working pressure, and the pressure is 3 times of the working pressure. Vacuum resistance: for pneumatic ball valves with nominal inner diameter less than 300mm and working pressure more than 1.6Mpa, the vacuum resistance shall not be less than 100Kpa. For valves of other specifications, the vacuum of the forehead shall be specified by the agreement between the supplier and the demander. Safety evaluation of pneumatic ball valve used in domestic drinking water system: safety of pneumatic ball valve used in domestic drinking water system When flat angle pneumatic ball valve is used in domestic drinking water system, the water quality after passing the product shall comply with GB/T5749 Sanitary Standard for Drinking Water and GB/T17219 Safety Evaluation Standard for Drinking Water Transmission and Distribution Equipment and Protective Materials Relevant regulations and requirements.
Requirements for metal flange and flat union: metal flange shall meet the requirements of GB/T9119, and flat union shall meet the requirements of GB/T3289.37. Requirements when the end face of pneumatic ball valve is reinforced with steel wire rings: when the end face of pneumatic ball valve is reinforced with steel wire rings, the steel wire rings shall be round and located in the same plane in the same year. The difference between pneumatic ball valve and pneumatic ball valve: what is the difference between pneumatic ball valve and pneumatic ball valve?
The two seem very similar, but their functions are different. Stainless steel metal hose, also known as metal hose, pneumatic ball valve and stainless steel hose, has good flexibility, temperature resistance, pressure resistance and corrosion resistance, and is suitable for transmission of steam, water, oil and various industrial gases and other media. The pneumatic ball valve ball is composed of a valve pipe with multiple layers of rubber scraped nylon cord fabric and outer rubber layer in the inner rubber layer and reinforcement layer. The valve materials used vary according to the media, including natural rubber, styrene butadiene rubber, butyl rubber, butyl rubber, EPDM, neoprene rubber, silicon valve, fluorine valve, etc. It has the functions of heat resistance, acid resistance, alkali resistance, corrosion resistance, wear resistance, oil resistance, etc. The pneumatic ball valve plays an important role in the movement of the pipeline system, thermal expansion absorption, vibration absorption. The model length and connection method of the pneumatic ball valve are based on the user's requirements.
The pneumatic ball valve of Dongfeng EPDM valve is provided with protective pull rods or protective rings at both ends of the bellows, and guide brackets are set on the pipes at both ends connected with it. In addition, there are corner type and transverse type expansion joints, which can be used to compensate the corner deformation and transverse deformation of the pipeline. The advantages of such expansion joints are space saving, material saving, easy standardization and batch production, and the disadvantages are short service life. Bellows expansion joints are generally used on pipes with low temperature and pressure and short length. With the improvement of bellows production technology, the application scope of this type of expansion joint is expanding.