How to change the control of pneumatic integrated butterfly valve to electric one? The metal parts with undifferentiated non-metallic parts can be wiped with clean and fine silk cloth impregnated with cleaning agent (to prevent fibers from falling and adhering to the parts). During cleaning, all grease, dirt, glue, dust, etc. adhered to the wall surface must be removed, and smooth with smooth grease.
、 The main function of the pneumatic butterfly valve is to intercept the flowing medium, which requires an absolutely safe operating environment and a high degree of automation. Since the main function of this new valve is to cut off the medium, it can achieve automatic control, reduce the cost of human and material resources, and is very easy to operate. At present, this new valve is widely used in chemical and power industry pipeline lines, To realize the automatic operation of the pipeline, we can install this valve on the control terminal, and control the dry and wet air to be directly input into the cylinder body of the gas power device through the positioning device, electromagnetic device and other components. According to the requirements of the gas power device, the direction of rotation is determined to successfully realize the opening, closing and regulating operation of the valve. On site operation can use intelligent positioning components to connect the positioning components to the bus, detect the operating status of the valve, and accurately diagnose the use of the valve.
Previous: How many wires are used for the pneumatic two-way valve connecting plate of pneumatic butterfly valve?
Next: Technical requirements for dust removal of pneumatic flange ventilation butterfly valve How to connect to plc
