The pneumatic ball valve of the filling machine uses compressed air as the main power source. It is filtered into dry and clean gas by the triplet (filter, pressure regulator, oil mist) carried in the machine, and then sent to the pneumatic ball valve actuator to drive the ball valve to rotate 0-90 degrees to open or close the valve. Proper fuel injection of the atomizer can ensure that the system works in a good environment. Working principle: the barrel pushing cylinder of the filling machine acts synchronously with the pneumatic actuator of the pneumatic valve. The pneumatic valve cylinder of the filling machine lifts the elbow and pushes the barrel cylinder into a barrel. When the pneumatic valve drops, the barrel pushing cylinder retracts. At this time, the positioning cylinder acts to push the barrel tightly against the brush. The brush of the barrel brushing machine operates continuously. The brush drives the empty barrel to rotate when brushing the barrel, Therefore, every part of the empty barrel can be brushed. The washed empty barrels are pushed to the rinsing station by the barrel pushing cylinder to clean the empty barrels, then the empty barrels behind are pushed into the upper barrel rack, and then the upper barrel rack is turned up by the upper barrel cylinder, and the empty barrels slide freely into the barrel seat.

Nonmetallic compensator is also called fabric compensator and the function of each part
The non-metallic contraction joint, also known as non-metallic compensator and fabric compensator, is a kind of compensator. The data are mainly fiber fabrics, rubber, and other high-temperature resistant data. It can compensate the vibration of fan and air duct operation and pipeline deformation.
Application characteristics of non-metallic contraction joint:
1. For low temperature - 70 ℃ to high temperature 260 ℃;
2. It is resistant to ozone, oxygen, light and climate aging, and has excellent weather resistance for outdoor use, with a service life of up to 10 years;
3. High insulation performance, dielectric constant 3-3.2, breakdown voltage 20-50KV/MM;
4. Good flexibility, large external friction, good elasticity;
5. Multi direction compensation: non-metallic compensator can provide large axial, angular and lateral displacement in a small size range; 6. No reverse thrust: the main materials are glass fiber fabrics and their coated products, which can not be transmitted. The use of non-metallic compensators for non-metallic contraction joints can simplify the design, prevent the use of large supports, and save a lot of data and labor; 7. Noise elimination and shock absorption: It is made of silicone rubber and glass fiber cloth, which has the characteristics of high thermal insulation, shock isolation and noise reduction, resistance to (high) and low temperatures, corrosion resistance, pressure resistance, simple structure, light weight, easy device maintenance, etc. Fiber fabrics and thermal insulation cotton have the function of sound absorption and shock absorption, which can effectively reduce the noise and vibration of boiler, fan and other systems; 8. Excellent high temperature resistance, corrosion resistance and sealing performance: organic silicon, fluorine and other macromolecular materials are used for coating treatment, with excellent high temperature resistance, corrosion resistance and sealing performance; 9. The device is easy to maintain.