This leakage level, Qiao Zhun, clearly stipulates the pressure and temperature range for inspecting the valve leakage. It is difficult and inappropriate to try to raise these parameters to higher pressure and temperature, because the accessible L cracks at the sealing surface of the valve core or the valve seat and errors in the valve assembly can be found in this level of leakage test.
Class V is mainly applicable to regulating valves with additional special sealed balanced or unbalanced single metal seats and single channel. Different from other grades, the allowable leakage of Grade V depends not only on the valve diameter, but also on the maximum differential pressure when the valve is closed under actual conditions. The test medium of Grade V is 50~125T (10~52 "C) water, and the test pressure is the maximum working differential pressure passing through the valve core, but not more than the ANSI valve body pressure grade. The minimum value is 100psi (0.7MPa) During the test, it should be noted that the whole valve chamber and connecting pipe must be filled with water and the valve core must be closed before the valve can be pressurized. The thrust shall be adjusted to the maximum rated value, which shall not be exceeded. In addition, sufficient time shall be allowed for leakage medium to flow into the pressurizer. Level V allowable leakage is 5 10ml ／ min in psi (5 10m/s mm MPa)

New design and trustworthy brand of plastic coated pneumatic butterfly valve
Now, as always, the plastic coated pneumatic butterfly valve has invented such brand effect after it entered the Chinese market, because it has such technical advantages. The brand feature of the promotion is that it has replaced the Chinese pneumatic butterfly valve. The advanced technical advantages, which can be seen from such a new design, are also worthy of recognition. It has really shaped such technological advantages and comprehensively grasped such a feature.
From some metal materials in China, the performance is also limited, so since this plastic coated pneumatic butterfly valve has entered the Chinese market, it has made great progress in such performance advantages and grasped such consumption characteristics, so it can be trusted by customers from time to time, truly grasp the technology of such advantages, and the design appearance is relatively satisfactory, It has really achieved the key to be recognized in the current market.
Therefore, the presentation of plastic coated pneumatic butterfly valves will also have different advantages in China's related equipment industry. Only in this way can we show more brand advantages. In the scientific market of China, we still pay more attention to such technological advantages and consumer brands. It has created a metal brand advantage in the Chinese market and a trustworthy quality.