How much power does the pneumatic wear-resistant butterfly valve need? The butterfly valve is generally less than 90 ° from full opening to full closing, and the butterfly valve and butterfly stem have no self-locking capacity. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem. The use of worm gear reducer can not only make the butterfly plate have self-locking ability, make the butterfly plate stop at any position, but also improve the operating performance of the valve.
Maintenance and commissioning of pneumatic butterfly valve
1. The inspection and maintenance plan of the cylinder is to clean the cylinder surface and add oil to the cylinder shaft circlip at ordinary times, and open the cylinder end cover regularly every 6 months to check whether there are sundries and moisture in the cylinder and whether the lubricating grease is in good condition. If the grease is insufficient or dry, the cylinder shall be disassembled for comprehensive maintenance and cleaning before adding grease.
