Quick mounted pneumatic ball valve Flange ball valve lining material 5、 The pneumatic ball valve reminds that if the valve is cleaned, the solvent used must not conflict with the parts to be cleaned and not corrode. If it is a special gas ball valve, it can be cleaned with gasoline. Other parts can generally be cleaned with reclaimed water. During cleaning, the residual dust, oil stain and other attachments shall be thoroughly cleaned. If it is impossible to clean with clean water, the valve body and parts can be cleaned with alcohol and other cleaning agents without damaging them. After cleaning, the assembly can be carried out after the cleaning agent is completely volatilized.
Influence of unreasonable installation of stainless steel pneumatic butterfly valve pipeline
In order to play its own role in the pipeline, the stainless steel bellows cannot be separated from its installation, so the correct installation of pneumatic butterfly valve is a necessary step. If there is no reasonable installation, it will lead to its incomplete role, which will also have an impact. Now let's introduce the influence of unreasonable installation of pneumatic butterfly valve.
1. When the stainless steel pneumatic butterfly valve is installed in the opposite direction, it will cause condensate to enter into the corrugated interior and affect the operation. It is assumed that under bad circumstances, it will also cause ice to cause damage to the stainless steel bellows and affect the normal operation.
2. When the stainless steel pneumatic butterfly valve is installed, if it deviates from the center line, it will have shortcomings. If it cannot be used normally, it will also cause leakage. Not only the bellows will be damaged, but also the whole system will be affected.
3. The advantage of the packed stainless steel pneumatic butterfly valve is that the pipe diameter is small. Assuming that the compensation amount is large and the installation position is limited, other compensators cannot be installed. Moreover, the packing must be changed regularly, which will lead to jamming when lateral displacement occurs.