Introduction to performance of damping pneumatic butterfly valve
Damping is one of the three basic elements of handling shock. However, its performance parameters are difficult to test, and its shock absorption effect is difficult to predict. Therefore, in general, the first way to stop the shock absorption control is to add mass, change stiffness, add isolators or dynamic shock absorbers, while in some special places, it is necessary to use the damping method. For example, for some pneumatic butterfly valves with thin plate structure, which make people feel helpless, damping method can achieve satisfactory results.
Damping pneumatic butterfly valve has the following benefits: it can stop the oscillation peak value under the resonance frequency; Reduce the transmission of oscillation along the structure; Falling tectonic noise. It is worth pointing out that damping is the most useful for suppressing oscillations in the resonant region, but it is less effective in the non resonant region.
The damping tension spring shock absorption has two advantages: the low frequency of the tension spring shock absorber and the large damping of the rubber shock absorber. By separating the advantages of the two points, the phenomenon of amplitude surge when the tension spring shock absorber resonates is eliminated, and the natural frequency comparison of the rubber shock absorber is handled.
Damping pneumatic butterfly valve is mainly completed by using the inherent characteristics of damping data and the reasonable planning of damping structure. Damping data is a new type of special data developed in the past decade, which has gained more and more effects in many fields. It is a kind of polymer data, which has high damping characteristics when converting modes, that is, it can consume energy when deformation, and can stop the peak value of structural oscillation in a wide frequency range.

How to stop the assembly of plastic coated pneumatic butterfly valve
In the case of excessive industrial consumption, plastic pneumatic butterfly valves are indispensable products, which can improve product quality and consumption effect. In order to ensure the safe use of plastic pneumatic butterfly valves in the application process, attention should be paid to the relevant installation methods and application methods. In the installation and operation process, attention should be paid to the following points
Pay attention to the pressure. In the process of application, the model of plastic hose is a certain working pressure. There are different methods for calculating the pressure of different specifications. In the process of application, it cannot be used less than the maximum pressure of the system. In the process of application, the size of the pressure not only determines the working pressure of the software, but also determines the use time of the hose. It is also a maintenance of the equipment itself, It can prevent damage to human beings caused by equipment damage
It also has a certain impact on the temperature of the operating environment, and the regular operating temperature cannot be exceeded during the operation. During the operation of the environment, too high or too low ambient temperature will have a certain impact on the performance of the hose. The quality of the hose will drop, leading to failure in normal operation
In the process of application, it is also necessary to consider the fluid required. Different hoses should be selected according to the needs of different fluids to improve the safety of life and war
In the process of linking, we need to pay attention to ensure the safety and quality of the link components, so it is necessary to deal with them in time to ensure safety. In order to ensure the normal use of plastic pneumatic butterfly valves, the above methods need to be standardized to improve the use safety and increase the use quality