What is the structure of the electric butterfly valve in life?
We have seen and understood many electric butterfly valves on the market today, but are we really clear about their structure? Today, our editor will share with you, please see below:
The electric butterfly valve is of curved bag structure, and the number of curved bags is usually 1~3. However, it can also be designed to form sleeve type, membrane type, and band type electric butterfly valves according to needs, and it can also be used under certain conditions. The end structure of the existing curved bladder electric butterfly valve can be divided into three categories according to the connection mode: one is the fixed flange connection type, the edge size of both ends of the electric butterfly valve is equal to or slightly smaller than the maximum outer diameter of the curved bladder, and the flange ring and end plate are used for fastening connection after drilling several holes; The other is the looper flange connection type. The size of the edges at both ends of the electric butterfly valve is much smaller than the maximum outer diameter of the curved capsule, and there is no need to drill holes. A special flange ring and an ordinary end plate are used to fasten the connection; The third type is a self sealing type, which is not connected by flange, but is pressed into the end plate and self sealed when compressed air is filled. The electric butterfly valve is widely used in the self conditioning air suspension of commercial cars, buses, rail vehicles, machinery equipment and building bases. Electric butterfly valve
The above articles are all the articles brought to you by today's small editor. Thank you for your reading. For more details, please continue to pay attention to our website.