The shock absorption function of the shock absorber shall be evaluated through the shock absorption test.
Damping test is generally only carried out when the damper is newly planned for trial production, and it is not necessary to test the damper one by one after mass production; It only needs to carry out the type test.
However, for particularly important shock absorbers, or shock absorbers that must be conditioned in the shock absorption experiment to meet the skill requirements, they should be tested one by one.
The vibration reduction experiment should be carried out on the whole machine, so the experimental condition is the practical working condition; The vibration reduction experiment can also be carried out on a special vibration reduction test bench, that is, to imitate the practical working conditions, artificially make the vibration source, compare the difference between the shock absorber without it and the shock absorber installed in the future, so as to identify the quality of the shock absorber.