How should we install the pneumatic ball valve? What else should I pay attention to when installing?
1. The pneumatic ball valve shall be symmetrically arranged according to the central axis of the pump unit. Pneumatic ball valves can be arranged clockwise or counterclockwise.
2. When there are six installation points for the pneumatic ball valve of the unit, four of them shall be arranged at the four corners of the inert block or section steel base, and the other two shall be arranged on the long side line, and their positions shall be adjusted to make the compression deformation of the pneumatic ball valve as consistent as possible.
3. When installing damper ball valve vibration isolator for horizontal water pump unit, in general, the pneumatic ball valve shall be fixed with the ground, inert block or section steel base by connecting nuts.
4. When the vibration isolator of vertical water pump unit is installed under the base of the water pump unit, it shall be equipped with a steel frame and anchored; The section steel base and the pneumatic ball valve shall be fixed with bolts (with ball valve washers). Anchor bolts shall be set in the ground or floor, and the pneumatic ball valve shall be fixed on the ground or floor through the anchor bolts.
5. The side line of the pneumatic ball valve shall not exceed the side line of the inert block; The supporting area of the steel frame shall not be less than the area of the pneumatic ball valve.
6. Before construction and installation, timely inspection shall be carried out. During installation, the static compression deformation of pneumatic ball valve shall not exceed the maximum allowable value.
7. When installing the pump unit, the supporting ground for installing the pump unit shall be flat and have sufficient bearing capacity.
8. The pneumatic ball valve of the unit shall avoid contact with acid, alkali, organic solvent and other substances. The pneumatic ball valve was introduced into the floating raft vibration isolation system, which is a development and progress of the pneumatic ball valve system and has made a contribution to the valve.