The pneumatic butterfly valve is installed to reduce vibration by changing the disturbing force of the vibration source or the transmission characteristics of the system. Pneumatic butterfly valves are classified from the point of view of raw materials with resistance. They are mainly divided into hydraulic pneumatic butterfly valves and hydraulic pneumatic butterfly valves. There is also a pneumatic butterfly valve with variable resistance.
Any pneumatic butterfly valve has its limitations. For example, ball valve pneumatic butterfly valve cannot be used for vibration isolation of machines with similar frequencies in many cases, and air cushion pneumatic butterfly valve may not be used for vibration isolation of on-board equipment. But this does not mean that they have no valve effect, only that they are not suitable for some occasions. The same is true for pneumatic butterfly valves. Pneumatic butterfly valve is suitable for high-frequency vibration equipment, and also suitable for some types of stamping vibration. The effect is very good! Finally, many pneumatic butterfly valves on the market only have the appearance, not the lining! Their design premise is not designed according to the vibration reduction requirements at all. Such products cannot be called pneumatic butterfly valves at all, which is the root cause of the deterioration of pneumatic butterfly valves.
Finally, pneumatic butterfly valve is widely used;
To sum up, we should not misunderstand that pneumatic butterfly valves have no damping effect. If the desired effect is not achieved, then there must be no pneumatic butterfly valve suitable for you.