Many friends may not feel strange when it comes to electric ball valves. Especially in recent years, with the increasing application scope of electric ball valves, problems of one kind or another will inevitably occur in the process of their use. So what is the reason for the failure of the electric ball valve? How can we better avoid these situations? Here is a brief introduction.
1. Generally speaking, if the same problem often occurs with the electric ball valve, it is necessary to see how its design scheme is and whether there are certain loopholes. If there are certain defects in the design process, such as the consideration of pressure is not particularly thorough, it will also affect the quality of the electric ball valve.
2. Material problems Secondly, if the design process of the electric ball valve is found to be correct during the maintenance of the electric ball valve, we need to see how the material selection of the electric ball valve is. If its pressure resistance, stability or service life are not particularly good, we also need to see whether there is a quality problem of the material, If the selected materials fail to meet the operating requirements of the electric ball valve, then naturally the service life is not particularly good. In general, electric ball valves, as a very important part of machinery and equipment, can easily cause various problems if the product quality cannot be well understood. In order to better solve these problems, it is also necessary to pay attention to the quality of raw materials when selecting electric ball valves.