Is your pneumatic high-pressure ball valve maintained according to the above methods? If you want to extend its service life, you cannot lack these steps. So far is today's sharing. If you want to know more, please pay close attention to this site.

How to make the pneumatic ball valve have a longer service life and stable performance? The following factors need attention:
1、 Clean the sundries and iron filings in the pneumatic valve with clean water before use.
2、 When the pneumatic valve is closed, there will still be some residual media in the valve. Cut off the power supply and air supply before sorting out, so as to completely release the pressure in the valve body.
3、 Valves generally use sealing materials to prevent leakage and wear, and sealing materials need to be regularly sorted out.
4、 The nuts and bolts on the flange shall be fixed tightly to prevent the uneven acceptance between the flange faces from damaging or cracking the cushion surface, which may lead to the leakage of the medium from the valve flange butt joint.
5、 If the valve works in the open air for a long time, it will lead to rusting of the valve and components, which may make the valve unable to operate normally. Therefore, maintenance and testing are required to ensure the stable operation of the performance