In these cases, it is suitable to install single flange pneumatic ball valve. Single flange pneumatic ball valve is suitable for connecting one side to the flange and welding the other side to the pipeline. During installation, adjust the installation length between the two ends of the product and the pipe or flange. After installation and welding, tighten the gland bolts diagonally and evenly to make them a whole. Of course, if you put them in a suitable environment, they will play a better role. Now let's talk about the following environment, which is more suitable for installation. Single flange pneumatic ball valve is mainly used in the following four environments:
1、 Because this series of products are metal products with high tensile and compressive strength, superior soft sealing performance, convenient loading and unloading and other functions, they are used to electric power and metallurgy. 2、 The thrust of blind plate in pipeline operation plays a certain role in protecting the pipeline, especially providing great convenience for the installation and maintenance of the pipeline. However, pneumatic ball valves should be used at the outlet of the water pump and at the corner of the pipeline, because the pneumatic ball valves can turn the blind plate when starting the pump through the valve bolts (i.e. full screw bolts)
3、 Water supply and drainage, sewage treatment and other industries are mainly used for the connection between pumps, valves and pipelines. It has a certain multi-directional displacement effect in pipeline operation, which can be alleviated.
4、 The thrust is transmitted to the pump and various parts of the pipeline to prevent the thrust concentrated on the pipeline or the near end of the pump from causing impact damage to the equipment. These are the places where pneumatic ball valves are suitable for installation. Some people may say that they cannot be installed in other environments. Of course not, but they may not play their role in other places.