Before installing the pneumatic switch ball valve, two protective covers should be opened, and then the product should be thoroughly cleaned to avoid the existence of some magazines, which will affect the use effect. Some novices may think that since there is a protective cover, there is no need to clean at this time. In fact, everything should be prepared in a variety of ways. Only when you are fully prepared for various things, the entire installation is completely guaranteed for you.

Q941F-16P-50 Electric Float Valve Supply Features:
1. Close tightly and reliably. The solid Q ring seal is adopted, and the hydraulic control principle is used to make the sliding plate close in direct proportion to the water inlet pressure, so that the sealing reliability is high.
2. Excessive flow. The valve body adopts full channel streamline design, with small fluid resistance and large flow.
3. Safe operation. With hydraulic operation, the liquid level of water tower or pool can be automatically controlled with high accuracy.
4. Easy to use and maintain. The main valve is installed outside the pool, which is convenient for commissioning and inspection and simple for maintenance. Q941F-16P-50 electric floating ball valve supply working principle: the floating ball must always float on the water. When the water surface rises, the floating ball also rises. When the floating ball rises, the connecting rod will also rise. The connecting rod is connected to the valve at the other end. When it rises to a certain position, the connecting rod supports the rubber piston pad to seal the water source. When the water level drops, the floating ball also drops, and even dry driving the piston pad to open.