1. When the upstream surface is corrosive medium, the gap can be sealed with sealing materials. See the waterproof casing atlas for the practice; Installation drawing of flexible waterproof sleeve (Type A).
2. Filler materials of flexible waterproof casing: asphalt hemp fiber, polystyrene board, PVC foam plastic board.
3. Sealing paste: polysulfide sealing paste, polyurethane sealing paste.
4. The dimensional tolerance and geometric tolerance of welding structure shall comply with JB/T5000.3-1998. Manual arc welding is adopted for welding, and the welding rod model is E4303, and the brand is J422. The basic shape and size of weld groove shall comply with GB985-88.
5. When flexible waterproof casing is rolled, the allowable deviation of perimeter is D2 ≤ 600, D2>600 ± 0.0035D2.
6. The thickness of the concrete wall where the wall passes through shall not be less than 300, otherwise the wall shall be thickened on one side or both sides, and the diameter of the thickened part shall be at least D5+200.
7. The weight of flexible waterproof casing shall be calculated with L=300. If the wall thickness is greater than 300, it shall be calculated separately.
8. If a non concrete wall is encountered at the place where the flexible waterproof casing penetrates the wall, the concrete wall shall be used locally, and the casting range shall be 200 larger than the wing ring diameter (D5). Moreover, the casing must be cast at one time on the inner wall. Whether it is a pneumatic ball valve, a valve pneumatic ball valve or a pneumatic ball valve, they will change according to the different connection methods, according to the high temperature resistance, corrosion resistance Wear resistant products are divided into different types. Please note the operating conditions when placing an order, and we will serve you wholeheartedly. Pneumatic ball valve can also be called flexible pneumatic ball valve, pneumatic ball valve, pneumatic ball valve, flexible pneumatic ball valve, valve expansion joint, pneumatic ball valve, shock absorber, etc. It is a pipe connector with high elasticity, high air tightness, medium resistance and weather resistance. The pneumatic ball valve is generally composed of inner rubber layer, fabric reinforcement layer (reinforcement layer has multi-layer rubber scraped nylon cord fabric), middle rubber layer, outer rubber layer, end reinforced metal ring or steel wire ring, which is formed by high temperature and high pressure vulcanization and loosely combined with metal flange or parallel joint. This product makes use of the advantages of the valve, such as high elasticity, high air permeability, medium resistance, weather resistance and radiation resistance, which can reduce the vibration and noise of the pipeline and compensate for the expansion and contraction caused by temperature changes. The valve materials used vary according to the media, including natural rubber, styrene butadiene rubber, butyl rubber, butyl rubber, EPDM, neoprene rubber, silicon valve, fluorine valve, etc. It has the functions of heat resistance, acid resistance, alkali resistance, corrosion resistance, abrasion resistance, oil resistance, etc.