Shell structure: the valve body of the fixed ball valve can be designed into three types, namely, cast structure, forged structure and all welded structure, according to the user's needs and actual working conditions. The ball valve with all welded structure is mainly suitable for underground use.

Stainless steel pneumatic butterfly valve joints mainly include threaded joint, flange joint, quick joint joint, etc.
Selection of pipe type:
(1) Size: nominal diameter of hose, selection of connector type (mainly flange connection, thread connection, quick connector connection), size of pneumatic butterfly valve, and hose length.
(2) The pressure shall be based on the practical working pressure of the hose, and then the nominal diameter and pressure gauge of the corrugated pneumatic butterfly valve shall be inquired to determine whether the pneumatic butterfly valve of stainless steel mesh sleeve type can be used.
(3) The chemical properties of the medium recommended in the medium hose determine the material of each part of the hose according to the corrosion resistance of the hose material. (4) The working temperature and range of the medium in the temperature hose; Ambient temperature when the hose is working. In case of high temperature, it is necessary to confirm the pressure after temperature correction according to the temperature correction coefficient of working pressure under high temperature of pneumatic butterfly valve, so as to ensure the correct pressure level is selected. (5) The status is based on the status of the hose when it is used, referring to the correct application and installation method of the pneumatic butterfly valve and the optimal length of the hose during settlement compensation, the length calculation of the hose in various motion states, and the minimum bending times and minimum bending radius of the hose. The parameters correctly select the hose length and correctly install it.