Structure knowledge of split intelligent pneumatic double eccentric ball valve The manufacturers of rubber pneumatic butterfly valves are increasing from time to time?
The manufacturers of rubber pneumatic butterfly valves are increasing from time to time:
In the past, the consumption of pneumatic butterfly valves has become increasingly high-tech, which has a great impact on the stability and service life of the equipment.
It has been widely used in various professional fields. Including automobile manufacturing, railway transportation, marine transportation and aircraft aviation. So that it can be said that anti demand vibration and noise reduction can be applied to it. It can be so widely used by human beings because of its excellent characteristics.
Its primary material is made of rubber. Therefore, it also has the extremely strong elastic properties of rubber. Compared with other steel materials, it is more elastic, lighter, and more conducive to vibration reduction. Moreover, due to the material of rubber, its shape can be modified and selected according to the needs, and its strength can also be trimmed by other methods until it reaches the ideal function.
Its damping value is appropriate, the installation mode is rich, and the stability is good. Moreover, if the vibration is relatively large, it can reduce the noise and vibration. It can be said that this pneumatic butterfly valve is really a suitable and convenient equipment. Moreover, rubber shock absorbers are usually used in high-tech aerospace industry, which shows the universality of the application of rubber shock absorbers.
Welding of joint and net sleeve
(1) Clean. Clean the joint, mesh sleeve and outer ring to be welded with acetone.
(2) Clamping. Assemble the joint, net sleeve and outer ring according to the drawing, install the welding fixture, and then install it on the automatic welding installation.
(3) Welding. Adjust the welding parameters, adjust the welding gun in place, and start welding according to the operating procedure of the automatic circumferential welding machine.
(4) Inspection. After the welding of the mesh sleeves at both ends of the pneumatic butterfly valve is completed, the air tightness inspection shall be stopped.
