How to deal with the noise generated by the axial flow house fan during operation?
The noise generated by the axial flow house winder in operation is the pneumatic butterfly valve corresponding to the model of the device. The pneumatic butterfly valve is a good helper for noise reduction, and it can also give you a healthy living environment and living environment.
What is the axial flow house winder?
When the axial flow house winder operates at normal temperature, it will have some high temperature conditions, but all of them are within the normal range. This is because the parts of the machine rub against each other, generating heat and causing the body temperature to be high. But not all conditions of high temperature are normal. The body temperature of the fan equipment exceeds the normal value, and the pneumatic butterfly valve of the axial flow house fan device is introduced as follows:
Load range: 1~10kg
Elastic coefficient: 0.2mm
Applicable deflection: 25mm

Maintenance of transmission parts
In the process of opening and closing the valve, the original lubricating grease will continue to run off. In addition, temperature, corrosion and other factors will also make the lubricating oil constantly dry up. Therefore, the transmission part of the valve should be checked frequently. In case of lack of oil, it should be replenished in time to prevent increased wear due to lack of lubricant, resulting in inflexible transmission or cartridge failure.