How to show the performance of rubber shock absorber in cars
As we all know, rubber shock absorbers have invaded most industries and industries in the past. The main reason is that they have strong performance and can maintain many mechanical equipment and various vehicles, including automobiles. The automobile is the most commonly used means of transportation for human beings in the past. It can be said that the automobile is one of the vehicles with the highest demand in the world, and the rubber shock absorber is also a key existence for the automobile. It can maintain the life of the automobile and improve its warmth.
It can be said that the presence of rubber shock absorbers is very important for cars, which is entirely due to its excellent performance.
1. The rubber shock absorber has very good anti vibration performance: its surface is light and firm, which can effectively restrain the shock when the spring rebounds after shock absorption and the impact from the road surface, so the anti vibration performance is very good;
2. Rubber vibration damping has a good elastic function: its good elastic function enables it to deal with problems such as damping filtration, sealing, throttling, sound absorption and noise reduction in the environment of upper and lower temperature, strong radiation, violent vibration and corrosion, and can prepare various structural shapes according to different working conditions;
3. The rubber shock absorber has good safety performance: its quality safety is a necessary condition to ensure the stable driving of the car. For this reason, its bottom is designed with anti slip rubber, and its top is also equipped with a rubber sheath, so that it can achieve a good anti-skid effect. Moreover, since the product body has been hot-dip galvanized, and the springs have been processed through heat treatment, ED rust prevention, paint baking and other procedures, the wear resistance is very strong, it is not easy to be damaged, and the safety coefficient is high. At the same time, bolts shall be used to fasten it, and the safety performance shall be further improved.
It can be seen from the above that the performance of rubber shock absorber is very important for a car. It can be said that if a car does not have a rubber shock absorber, it will be a terrible thing. Not only will the parts in the car be easily damaged by long-time vibration, but also the noise will be quite loud. It will be a painful journey for drivers and passengers!

The conductivity of industrial water and its aqueous solution is greater than 10-4S/cm, the conductivity of acid, alkali and salt solution is between 10-4 and 10-1S/cm, so there is no problem in use, and the conductivity of low distilled water is 10-5S/cm. Electromagnetic flowmeter cannot measure liquid with very low conductivity, such as petroleum products and organic solvents. Gas, steam and liquid containing many large bubbles cannot be measured. It is found from the data that some pure solutions or aqueous solutions have low conductivity, which is considered to be unusable. However, in actual work, there will be instances that can be used because of impurities, which are beneficial to increase conductivity. For aqueous solution, the conductivity in the data is measured in the laboratory with pure water ratio. The actual aqueous solution may be proportioned with industrial water, and the conductivity will be higher than that found, which is also conducive to flow measurement.