Pneumatic butterfly valve introduces you to the knowledge related to automobile modification?
How much do you know about car modification! This is a very serious question. Let me introduce you to the metal pneumatic butterfly valve!
The metal pneumatic butterfly valve is essential for vehicle modification, and good shock absorption performance is particularly important when driving at high speed, especially when crossing a curve. In the field race, ordinary curves have a 60 degree bevel, while the vehicle speed is generally about 100 kilometers per hour, so the body is prone to tilt and become unpredictable. Fortunately, the chassis of Sena is relatively stable. When driving on ordinary gravel roads, the whole body will not shake too much. So the selection of pneumatic butterfly valve is very important!
The wheel hub plays an important role in driving stability. The light weight of aluminum alloy wheels can reduce the momentum during driving to a certain extent. At the same time, aluminum alloy wheels are generally processed and consumed by the whole mold, without solder joints, so the safety is high. A lot of heat will be generated due to friction during driving. Compared with other metals, aluminum has better heat dissipation, which can quickly distribute the heat during driving, Stick to uniform rotating speed so as to keep the body balanced.
The above contents are sorted out and sent to you by Songxia Xizhen Pneumatic Butterfly Valve Co., Ltd. If you want to know more, please contact us!

2. It is recommended to use special flange for butterfly valve, namely HGJ54-91 socket welding steel flange, for the installation of pneumatic butterfly valve.
3. The pneumatic butterfly valve is installed in the pipeline. The preferred position is vertical installation, but it cannot be inverted.
4. The pneumatic butterfly valve needs to adjust the flow in use and is controlled by a pneumatic actuator.
5. For manual butterfly valves with many times of opening and closing, open the worm gear case cover in about two months, check whether the grease is normal, and keep a proper amount of grease.
6. Check the connection parts to ensure the tightness of the packing and the flexible rotation of the valve rod.
7. The metal sealed pneumatic butterfly valve is not suitable for installation at the end of the pipeline. If it must be installed at the end of the pipeline, it needs to be equipped with outlet flange to prevent the seal ring from overstocking and over positioning.
8. The valve rod installation and use reaction shall be regularly checked for the valve use effect, and any fault found shall be eliminated in time.