6. Timely check before installation. Static compression of shock absorber during installation - Shanghai Dongfeng Pump Valve Factory - 上海花千坊_上海龙凤花坛_夜上海最新论坛

6. Timely check before installation. Static compression of shock absorber during installation

6. Timely check before installation, and the static compression deformation of shock absorber during installation shall not exceed the allowable value
7. After the pump device is installed, the supporting ground of the pump body shall be flat and have sufficient bearing capacity
8. Shock absorber
The unit shall avoid contact with acid, alkali and organic solvent
The structure of the shock absorber is a piston rod inserted into the cylinder, which is filled with oil

Previous: Shanghai Jindi Yijing Community: ZTA damping motor for dry-type transformer room

Next: Technical requirements and equipment selection: (1) hydrostatic test (2) residual deformation