The electric butterfly valve is installed to reduce vibration by changing the disturbing force of the vibration source or the transmission characteristics of the system. Electric butterfly valves are classified from the point of view of raw materials for resistance. They are mainly divided into hydraulic electric butterfly valves and hydraulic electric butterfly valves. There is also an electric butterfly valve with variable resistance.
Any electric butterfly valve has its limitations. For example, in many cases, the electric butterfly valve cannot be used for vibration isolation of machines with similar frequencies, and the air cushion electric butterfly valve may not be used for vibration isolation of on-board equipment. But this does not mean that they have no valve effect, only that they are not suitable for some occasions. The same is true for electric butterfly valves. The electric butterfly valve is suitable for high-frequency vibration equipment, and also suitable for some stamping type vibration. The effect is very good! Finally, many electric butterfly valves on the market only have the appearance, not the lining! Their design premise is not designed according to the vibration reduction requirements at all. Such products cannot be called electric butterfly valves at all, which is the root cause of the damage to electric butterfly valves.
Finally, the electric butterfly valve is widely used;
To sum up, we should not misunderstand that the electric butterfly valve has no damping effect. If the expected effect is not achieved, then there must be no electric butterfly valve suitable for you.