Characteristics of pneumatic ball valve:
In mechanical equipment and other vibration isolation systems, pneumatic ball valves have the following points:
In design, the height, bearing capacity and constant of the ball valve are irrelevant and can be selected in a large range.
The stiffness of the pneumatic ball valve can be reduced by changing the working pressure of the air and increasing the volume of the additional air chamber, so as to design a soft ball valve.
The stiffness of the pneumatic ball valve changes with the load, so the vibration isolation effect of the system is similar to that of air.
Through the high control system, the working height of the pneumatic ball valve can be maintained under any load, which is conducive to engineering application.
When the equipment is installed on the equipment floor, house or ground, the requirements for pneumatic ball valve are very high, and pneumatic ball valve damper should be used at this time.
The same pneumatic ball valve can have different carrying capacity by adjusting the working pressure.
Pneumatic ball valve has excellent vibration isolation performance of high and low frequency vibration, impact, solid sound, etc.
The damping can be adjusted by different damping tubes.
The weight of the ball valve part of the pneumatic ball valve can be lighter. For example, the weight of the 10t bearing and the detachable upper and lower plates and parts of a pneumatic ball valve with a diameter of 500mm is only about 5kg.