Is there any installation direction in the schematic diagram of vacuum pneumatic ball valve- Shanghai Dongfeng Pump Valve Factory - 上海花千坊_上海龙凤花坛_夜上海最新论坛

Is there any installation direction in the schematic diagram of vacuum pneumatic ball valve?

Is there any installation direction in the schematic diagram of vacuum pneumatic ball valve?

Inevitable problems in the inspection of pneumatic butterfly valves?
The pneumatic butterfly valve on the car is more important than the safety of the car, so we should also pay attention to whether the pneumatic butterfly valve can also work normally during the car inspection. In addition to the time of vehicle inspection, we can detect the pneumatic butterfly valve, and in ordinary times we can also stop the inspection ourselves. Next, our personnel of metal pneumatic butterfly valve will sort out some inevitable inspection steps for you:
When the car runs 10 to 15 kilometers on the uneven road, touch the pneumatic butterfly valve housing by hand. If it does not heat up, it indicates that the pneumatic butterfly valve may have lost its function due to lack of oil or damage of main parts. It should be removed for maintenance or replaced with new parts.
The failure or damage of the pneumatic butterfly valve will directly affect the ride comfort and comfort of the car, and will also affect the service life of the car parts. Therefore, the inspection and maintenance of pneumatic butterfly valves are also essential. If there is abnormal continuous vibration during the driving process of the car, carefully check whether the pneumatic butterfly valve can leak oil, and if it does, clean it up.
Check the working condition of the pneumatic butterfly valve when the car is suspended from the secondary home care. The inspection method is: fix the lower end of the pneumatic butterfly valve on the bench clamp, stretch and tighten it several times by hand, the normal pneumatic butterfly valve should have a certain resistance, and the stretching resistance should be greater than the resistance when tightening. If it is unstable or has no resistance, it may be that the pneumatic butterfly valve is short of oil or the parts are damaged. It should be repaired or replaced with new parts.
These are the inevitable problems that we usually check. I hope they can help the car owners. This article is organized by Dongfeng Xizhen Pneumatic Butterfly Valve Co., Ltd. You can pay more attention to our website and our metal pneumatic butterfly valve. Our website is //www.dongfengfamen.com/ If you have any questions, please leave us a message online, and we will give you a timely reply.

 pneumatic valve

Previous: Double acting pneumatic butterfly valve, with and without feedback, whether port 2 is open or not

Next: How about the price of high-performance pneumatic butterfly valve?