There are two ways to troubleshoot the electric ball valve: one is the control part of kinetic energy, and the other is the part of electric valve. Damage to either of these two parts will cause the equipment to fail to operate normally. Therefore, it is necessary to select an appropriate troubleshooting method. First, the execution object of the electric valve should be detected by troubleshooting, It is the main conveying object of power, which plays a key role in the internal equipment.

How to prolong the service life of the electric ball valve When the electric ball valve is divided and reinstalled, care must be taken to prevent damage to the sealing surface of the parts, especially non-metallic parts. When taking out the O-ring, special tools should be used. When installing, the bolts on the flange must be tightened symmetrically, gradually and evenly. First, check that the pressure of the upper and lower pipes of the pneumatic hemisphere valve has been removed, Only then can they be disassembled and differentiated, and the separated individual parts can be cleaned by immersion.