Groutable waterstop is characterized by high elasticity and tight deformation
The waterstop consumed by our factory is mainly used for the foundation works integrated with the concrete structure in the construction joints and deformation joints when the concrete is cast in situ, such as open equipment, tunnel culverts, water conveyance aqueducts, retaining dams, liquid storage structures, etc.
There are device holes on the groutable waterstop to facilitate site fixation and positioning. In the architectural design of ordinary large projects, construction joints, settlement joints and deformation joints need to be reserved due to the failure of continuous pouring, or the deformation of the foundation, or the thermal expansion and contraction of concrete components caused by temperature changes, and these joints must be equipped with waterstop to avoid water leakage. The device holes are arranged on the groutable waterstop to facilitate site fixation and positioning; The grouting pipes on both sides are equipped with check valves for anti blocking function, which will not block the grout outlet when pouring concrete; During grouting, the grout outlet shall be smooth; Fast and effective grouting repair can be stopped after grouting pipe and check valve, and the waterproof quality after repair is safe and reliable, without recurrence; After grouting, the slurry in the pipe shall be cleaned immediately. Repeated grouting can be stopped as required. This product is suitable for waterproofing of construction joints and expansion joints in all concrete projects. The groutable waterstop is characterized by high elasticity and tight deformation, which produces elastic deformation under various loads, so as to effectively consolidate the seal and avoid water leakage Water seepage and valve buffering.