Precautions for the storage of electric ball valves for water pipes The electric ball valves for water pipes (also known as expansion joints for water pipes) are one of the equipment that must be used in the pipeline. The details of each link cannot be ignored. Some users have purchased electric ball valves for water pipes, but they may not be installed and used at that time. They may be stored in the warehouse for standby. In this case, The storage protection of the electric ball valve of the water pipe is the key to ensure the appearance quality.
After purchasing the electric ball valve for water pipe, if it is not urgent to use it, it should be stored in the warehouse. When leaving the factory, the manufacturer has wrapped the electric ball valve for water pipe with woven bags, mainly to protect the surface coating. Pay attention to the following points during storage:
1. Ensure that there is enough space in the warehouse. If the warehouse is very crowded, it will be quite troublesome to take it out when using the electric ball valve of the water pipe. 2. Ensure that the warehouse is ventilated and there is no water on the ground. This is the main measure to prevent moisture.
3. The electric ball valve of the water pipe should be lined with boards, woven bags, etc. to ensure that there is no direct contact between the upper and lower parts. 4. It is better to brush the surface with protective oil before storage, which is mainly used for waterproofing. The above four items ensure that the performance and appearance of the electric ball valve of the water pipe are intact during storage. When transporting, such as using a crane or forklift, it is better to line the carton under the expansion device of the water pipe to prevent the abrasion of the surface coating and ensure the appearance quality. When users select electric ball valves for water pipes, the advantages of electric ball valves for water pipes shall be verified according to the following specifications.