How to solve the problem of water leakage of ball mill cast iron electric ball valve in case of water leakage? What if the ball mill cast iron electric ball valve leaks? Many people have this kind of confusion. Dongfeng gives us a suggestion. According to the specifications, the leakage depends on the situation. If the leakage is between the pipe and the surrounding area, it is generally slotting treatment, and the pipe can be filled with whatever it wants. For more business, please consult Hengchang Pipeline Equipment Co., Ltd.
Ball cast iron electric ball valve is a steel pipe with an external wing ring (a ring made of steel plate is sleeved on the steel pipe), which is installed in the wall (mostly a concrete wall). It is used for ordinary pipes to pass through the wall, which is conducive to the waterproof of the wall. However, ball cast iron electric ball valve Henan ball cast iron electric ball valve is not allowed to have deformation after installation. In addition to the external wing ring, there is a baffle ring inside the casing, such as the flange inner wire, They can be sold in complete sets or processed by themselves, and used for pipes that need shock absorption. For example, when the pipe connected to the water pump goes through the wall, that is to say, if the waterproof performance of both sides of the wall is considered, the electric ball valve should be selected; Electric ball valves can be selected if only the wall penetration of the pipeline is considered, without considering the waterproof performance of both sides of the wall and the displacement and deformation of the pipeline after the wall penetration. We all know that the electric ball valve in the room with water also plays a certain role in preventing water from seeping, flowing and flowing to the lower layer. The "prevention" here has two aspects. On the one hand, it refers to that after the completion of the project, the user has improper reasons in the decoration stage, causing the running water to flow to the lower layer through the sleeve pipe; On the other hand, after the user enters, the tap water flows through the electric ball valve to the lower layer due to unexpected reasons. Moreover, the former is often more than the latter. There are two reasons for flowing in the lower layer: one is the low height of the electric ball valve; Second, although the height is enough, the casing opening is not tightly sealed. Therefore, the specification has strict requirements on the height of the electric ball valve: in the room with water (kitchen, toilet, etc.), the height of the electric ball valve should be 50mm higher than the survival ground, and the electric ball valve of the plastic water supply pipe should be more than 100mm higher than the survival ground. The company's main products are electric ball valves of various models, which are designed and produced in strict accordance with national standards. Special specifications and models can be customized according to user needs and requirements.