The temperature and size of the electric ball valve shall be strictly controlled during operation. The electric ball valve needs to control the temperature of the transported substances during operation. The electric ball valve connects the pipeline, valves and other equipment. When transporting substances, there are control requirements for the particle size, corrosivity and fluidity of substances. The temperature control range of the electric ball valve during operation is 180~200 degrees. The temperature at this stage is the most suitable for the electric ball valve, which will not damage the product.
When the electric ball valve works, it is not only necessary to control the temperature of the transported material, because the electric ball valve is connected with the pipeline and other equipment, so the overall pipeline equipment should also control the size, liquidity and corrosion of the material. The transportable material particles are powdery, with strong liquidity, and the material is liquid, with low viscosity, Good liquidity. Corrosive substances can be transported. However, the pipeline or electric ball valve and other equipment need to be replaced within the specified time. During operation, the electric ball valve shall strictly control the temperature, size, fluidity and corrosivity of substances. Avoid controllable problems. And now the overall material of the electric ball valve is made of high-strength alloy, which has the characteristics of high hardness, corrosion resistance, wear resistance, pressure resistance, impact resistance and good sealing. The difference between alloy and stainless steel metal is that the alloy has a certain toughness. When encountering the impact of huge pressure, it will produce a small amount of deformation, but it is not easy to break. Although the compression resistance and hardness of stainless steel metal are very good, stainless steel does not have the characteristics of toughness. When encountering huge pressure, it will affect the pressure resistance of the entire pipeline equipment.
The electric ball valve is made of alloy as a whole, and its performance characteristics in use are enough to prove that the electric ball valve has not only good pressure resistance, but also certain flexibility, and the effect of buffering pressure is more reliable. Therefore, the compensation capacity of the electric ball valve for the pipeline has been greatly improved. Electric ball valve is also called double flange electric ball valve, single flange electric ball valve, electric ball valve, expansion joint, pneumatic valve, electric ball valve, expansion joint. It is a new product that pumps, valves and other equipment are connected to the pipeline. They are connected by full bolts to make them a whole with a certain displacement, so that they can be adjusted according to the on-site installation size during installation and maintenance, and the axial thrust can be transmitted to the whole pipeline during operation. This not only improves the working efficiency, but also plays a certain role in protecting equipment such as pumps and valves.