Plug in flowmeter - Shanghai Dongfeng Pump Valve Factory - 上海花千坊_上海龙凤花坛_夜上海最新论坛

Plug in flowmeter

  • [Valve model]: DCLLJ-16
  • [Diameter specification]: DN200—2000mm
  • [Structure]: Straight through
  • [Valve body material]: cast steel
  • [Nominal pressure]: 1.0Mpa、1.6Mpa
  • [Applicable temperature]: 0-90°C
  • [Application Scope]: Industrial, agricultural, water conservancy, environmental sewage monitoring, urban water supply
Consult the manufacturer Online Message
  • Plug in flowmeter

Product features

Plug in electromagnetic flowmeter is used to measure the flow and total amount of various conductive liquids in various departments such as industry, agriculture, water conservancy, environmental sewage monitoring, urban water supply, etc. Compared with pipeline flowmeter, the measurement of plug-in electromagnetic flowmeter is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. Advanced excitation technology is adopted, with low power consumption, stable zero point, strong anti-interference ability and good reliability. There is no additional pressure loss, and the straight pipe section is required to be small in length and relatively simple in installation. The measurement range is wide, the full range flow rate can be set continuously and arbitrarily within 1.0m/s-10.0m/s, and the output signal is completely linear with the flow rate (flow rate).

Product features:

1. The conversion display adopts 16 bit high-performance microprocessor, 2 × 16 LCD display, convenient parameter setting and reliable programming

2. Two way measuring system, with three integrators installed inside, can respectively display the total amount of positive flow, negative flow and the difference between positive and negative flow

3. The conversion display has multiple outputs: current, pulse, digital communication, HART

4. Applicable to large diameter pipes, DN200-2000mm

5. The sensor body and electrode can be made of various materials

6. Small size, light weight, convenient transportation and installation, can realize continuous maintenance, disassembly and assembly

7. The price is cheap. The larger the pipe diameter, the higher the performance price ratio

Flow range:

technical parameter

Product parameters:

1. Nominal diameter of applicable flow pipe: DN200-2000mm.

2. Working pressure: ≤ 1.6MPa

3. Working temperature: ≤ 70 ℃

4. Upper limit range of flow rate: 1-10m/s, continuously adjustable

5. Measurement accuracy: ± 2.5%

6. Conductivity of measured medium ≥ 50 μ s/cm。

7. Electrode materials: 304, 304L, 316, 316L, Hastelloy, Ti, etc

8. The maximum distance from the conversion display is ≤ 50m.

9. Cable: RVVP type double core shielded cable or STT3200 type four core three shielded cable.

10. For the functions of the conversion display, please refer to the operating instructions of the electromagnetic flowmeter of our company.

Quotation process

Valve price:

Due to the different requirements of order quantity, packaging and delivery method, and the fluctuation of the price of valve raw materials, the price of valves will have a big difference immediately, so our products have not been marked with prices on the website, please understand.

If you select a valve product on this website and need to know the price or obtain relevant technical information, please contact us. We will reply immediately, and can select appropriate valve products for you according to your requirements, so that your procurement process is easy and pleasant.

Quotation process:

1. Please fax the name (or product model) of the valve you selected, the required order quantity, packaging requirements, delivery time, your company name, your company location and contact information to 021-36311208 Or telephone: 021-60547555。

2. After receiving the customer's purchase list, our company will provide the customer with various services such as valve quotation "price list", model selection "valve model" and technical guidance as soon as possible.

3. Specific matters: delivery date, special requirements, etc.

Ordering Instructions

1、 If the customer has special requirements for the product, the following instructions must be provided in the order contract:
(1) Valve body material (such as plastic, cast steel, stainless steel...)
(2) Connection type (such as flange, thread, clamp, etc.)
(3) Nominal diameter, pipe size
(4) Ambient temperature and pressure range
(5) Power supply voltage, air supply pressure
(6) Fluid properties (including nominal pressure, temperature, viscosity or acid-base)
2、 The company configures various driving devices according to the special requirements of customers. (electric control, pneumatic control)
3、 If the customer provides the determined valve type and model, the customer should correctly explain the meaning and requirements of the model (see the description of valve model preparation for details), and sign the contract on the condition that both the supplier and the buyer have the same understanding.
4、 After the customer tells the required valve model, specification, quantity, delivery time and place, the deposit of 20% of the total amount or the full payment for goods shall be remitted to our company's account in time, and the rest of the payment for goods shall be remitted before shipment, so as to arrange shipment in time.
5、 After the purchase is confirmed, our company will produce in strict accordance with the delivery date. The product processing cycle is generally 3 to 30 days, depending on the type and quantity of the order, and the specific delivery time is subject to the contract. In order to ensure that the goods you ordered are in place in time, please try your best to order earlier.
6、 Our company provides network distribution services according to the needs of customers, delivering goods to the branches (offices) of customers in major cities, and implementing door-to-door delivery services. After the products are accepted, our company will provide after-sales service.