What should be paid attention to for the rubber shock absorber device on the pump
Everyone knows that rubber shock absorbers can be installed on various pumps, mainly to reduce vibration and noise, and also to maintain pump performance and extend its life. So nowadays, rubber shock absorbers are used for pump installation, which is also the most advanced way to maintain the pump.
Although the rubber shock absorber is the best choice to be equipped with a pump, you should always pay attention to it when installing it. Different pumps have different installation methods, and the items you should pay attention to are also different. This is a necessary talent for the installation staff.
Methods and precautions for rubber shock absorber installation on different pumps:
1. The pneumatic butterfly valve shall be arranged symmetrically according to the central axis of the pump unit, and the pneumatic butterfly valve can be arranged clockwise or counterclockwise;
2. When the shock absorber of the unit has six installation points, four of them are arranged at the four corners of the inert block or section steel frame, and the other two should be arranged on the long side line, and their positions should be adjusted. The elastic bushing should make the compression deformation of the shock absorber as different as possible;
3. When the horizontal pump unit is equipped with a damping spring isolator, under normal conditions, the damper shall be fixed with the air, inert block or section steel frame with a connecting nut;
4. When the vibration isolator of vertical water pump unit is used, the metal wire pneumatic butterfly valve shall be set under the base of the water pump unit, and an anchor type device shall be used. The section steel base and the pneumatic butterfly valve shall be fixed with bolts (with spring washers). The foundation bolt is set in the air or floor, and the shock absorber is fixed in the air or floor after passing the foundation bolt;
5. The side line of the pneumatic butterfly valve shall not exceed the side line of the inert block, and the supporting area of the rubber metal pneumatic butterfly valve section steel base shall not be less than the area of the shock absorber;
6. Before installation, it shall be checked in time, and the static tightening deformation of pneumatic butterfly valve shall not exceed the maximum allowable value during installation;
7. When the pump unit is installed, the supporting air of the low-frequency damping pneumatic butterfly valve and the pump unit shall be flat, and shall have sufficient bearing capacity;
8. The shock absorber of the unit shall be prevented from contacting with acid, alkali, organic solvent and other substances.
Only by understanding and applying the above precautions can the rubber shock absorber be correctly installed on the pump, and the function and maintenance of the pump can be best experienced.

Stainless steel pneumatic butterfly valve industry focuses on talent support
In recent years, the market demand for high-end pneumatic butterfly valve products has increased by more than 50% every year, and the inlet pneumatic butterfly valve products have also increased by 30% every year. The pneumatic butterfly valve industry not only needs to introduce senior professionals urgently needed by some industries and enterprises, but also needs to accelerate the cultivation of talents in short supply in enterprises, cultivate a team of lock making employees with excellent quality, and provide strong technical support for the continuous development of the pneumatic butterfly valve industry in Wenzhou. With the rapid development of remote water meter, grating ruler, machine tool and other industries, and the continuous expansion of demand for pneumatic butterfly valve products in national defense, security, finance and other systems, the pneumatic butterfly valve market contains great potential and unlimited business opportunities. The stainless steel pneumatic butterfly valve industry focuses on talent support to improve the overall quality. The industry accelerated product restructuring 2012 is both a challenge and an opportunity for the pneumatic butterfly valve industry. Pneumatic butterfly valve enterprises will tap market potential, increase efforts to adjust product structure, and focus on high-tech, high value-added products and double button pneumatic butterfly valves; Work hard on independent intellectual property rights to form my central technology and patents, accelerate the transformation of scientific and technological achievements, and meet the needs of consumers at different levels.
2012 is a pivotal period for the development and promotion of the pneumatic butterfly valve industry. The stainless steel pneumatic butterfly valve industry will continue to adhere to the market-oriented approach and accelerate the adjustment of product structure.