Pressure rating code of pneumatic ball valve: pressure rating code: 16 means the pressure is 16 kg (1.6Mpa), and the maximum pressure can reach 64Mpa 150LB 300LB 600LB 900LB 1500LB 2500LB represents American standard pressure

The pneumatic ball valve of the filling machine uses compressed air as the main power source. It is filtered into dry and clean gas by the triplet (filter, pressure regulator, oil mist) carried in the machine, and then sent to the pneumatic ball valve actuator to drive the ball valve to rotate 0-90 degrees to open or close the valve. Proper fuel injection of the atomizer can ensure that the system works in a good environment. Working principle: the barrel pushing cylinder of the filling machine acts synchronously with the pneumatic actuator of the pneumatic valve. The pneumatic valve cylinder of the filling machine lifts the elbow and pushes the barrel cylinder into a barrel. When the pneumatic valve drops, the barrel pushing cylinder retracts. At this time, the positioning cylinder acts to push the barrel tightly against the brush. The brush of the barrel brushing machine operates continuously. The brush drives the empty barrel to rotate when brushing the barrel, Therefore, every part of the empty barrel can be brushed. The washed empty barrels are pushed to the rinsing station by the barrel pushing cylinder to clean the empty barrels, then the empty barrels behind are pushed into the upper barrel rack, and then the upper barrel rack is turned up by the upper barrel cylinder, and the empty barrels slide freely into the barrel seat.