Jinghu District FT330-29 547 Pneumatic Ball Valve Dongfeng Entity Factory
Jinghu District pneumatic ball valve, FT330-29 547 pneumatic ball valve
For the suppliers of FT330-29 547 pneumatic ball valve in Jinghu District, please contact Shanghai Dongfeng Pump Valve Factory. We are the manufacturer of Shanghai's large FT330-29 547 pneumatic ball valve. For more information, please contact us.
"Jinghu District FT 330-29 547 Pneumatic Ball Valve" Shanghai Dongfeng Pump Valve Factory is a comprehensive enterprise specializing in the integration of research, development, production and sales of valve noise reduction products. The company makes full use of years of design and production experience to optimize the combination of products and strive for complete varieties and stable quality. More than 50 engineering technicians in the factory have long-term experience in product production technology and practical installation and application on the project site, and are currently one of the domestic professional pipeline equipment R&D and manufacturers. The shock absorption products produced include: pneumatic ball valve shock absorber [pneumatic tire, shock absorption]; Flexible soft valve (valve throat) [single/double ball valve, concentric reducing valve]; Shock absorber [low-frequency composite shock absorber, suspension shock absorber, hanger shock absorber, shock pad, vibration isolator]; Stainless steel metal hose, stainless steel corrugated compensator, waterproof sleeve (rigid and flexible), cast iron expansion joint, steel expansion joint, etc. The enterprise has strong testing ability independently, and designs and manufactures vibration and noise reduction products of water supply and drainage, heating and ventilation structures according to customer requirements. Official website //www.dongfengfamen.com/ , product ordering hotline 02161551911, 24-hour service hotline 15201855009. Pneumatic ball valve, pneumatic ball valve and pneumatic tire have good high-frequency vibration isolation and sound insulation performance. Pneumatic ball valve requires small installation space and is easy to replace.
"Jinghu District FT330-29 547 Pneumatic Ball Valve" Do not use the pneumatic ball valve beyond the recommended safe extension height.
The flange sealing forms of the end and connecting plate of the pneumatic ball valve are: LHF, JBF, GF, HF and ZF. The end structure of the existing curved bladder pneumatic ball valve can be divided into three categories according to the connection mode: one is the fixed flange connection type. The size of the edges at both ends of the pneumatic ball valve is equal to or slightly smaller than the curved bladder. The large outer diameter is equal to or slightly smaller than the large outer diameter. After drilling several holes, the flange ring and end plate are used for fastening connection; The other is the looper flange connection type. The size of the edges at both ends of the pneumatic ball valve is much smaller than that of the large outer diameter of the curved capsule. There is no need to drill holes, and a flange ring and an ordinary end plate are used to fasten the connection The third type is self sealing type, without flange connection, it is pressed into the end plate, and self sealing when filled with compressed air.
When purchasing "FT330-29 547 Pneumatic Ball Valve" in Jinghu District, the key is to see the quality. Shanghai Dongfeng Pump Valve Factory is a professional supplier of "FT 330-29 547 Pneumatic Ball Valve". For more information, please visit the official website of Shanghai Dongfeng Pump Valve Factory for pneumatic ball valve.
Anning end face fully sealed valve throat | end face fully sealed valve throat Dongfeng manufacturer
End face fully sealed valve throat, tranquil end face fully sealed valve throat
Shanghai Dongfeng Pump Valve Factory is a professional manufacturer of end face fully sealed valve throats of various specifications. In addition to end face fully sealed valve throats, there are ANSI American standard valves, DIN German standard valves, BS British standard valves, KS Korean standard valves, etc. Meet the needs of different customers and markets. Exports to Europe, the Americas, Southeast Asia and many other regions. Company official website //www.dongfengfamen.com/ , Tel: 021-61551911.
Displacement performance test method of "Anning end face full seal valve throat" Dongfeng valve:
Sample:
Take one of the finished valve products that have been parked for not less than 24h after vulcanization as a sample; Equipment and tools:
Pneumatic pressure test pump or manual pressure test pump;
Pressure gauge (the operating pressure should be between 15% and 85% of the full scale reading);
Test medium:
Water, saponification liquid or suitable liquid.
Boost speed:
When the test pressure does not exceed 7.0MPa, the pressure rise speed is 0.075MPa/s-0.175MPa/s. If the above pressure rise speed cannot be reached, a suitable speed value can be negotiated;
Test preparation:
Install a flat flange cover with exhaust valve on one end of the straight flexible valve sample, and install a flat flange cover with air duct on the other end to connect with the hydraulic pump outlet pipe and fix it on the test bench, fill the test tube with low-pressure water or saponified liquid to exhaust air, close the exhaust valve and stop the pump. Adjust and fix the sample, measure and record the initial length of the sample;
Axial displacement test:
After the test is prepared, apply mechanical force in the axial direction to stretch or compress the sample to the axial elongation or axial compression specified in Table 2, and fix it; Apply the working pressure of the sample to the product at a pressure rise rate of 0.075MPa/s~0.175MPa/s for at least 1min, and check the sample for leakage, cracking, abnormal deformation and other damages. The flexible valve products for water circulation produced by our company are made of high-quality synthetic products, which are mainly used at the inlet and outlet of the condenser. The products have good overall performance, convenient installation and commissioning, corrosion resistance, good deformation recovery performance, and are not afraid of impact during installation and overhaul. The service life of steel expansion valves of the same type is significantly longer than that of steel expansion valves of the same type.
What media can be used for Anning end face full seal valve throat "valve: seawater, fresh water, cold and hot water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, product oil, air, gas, steam and granular powder. When large diameter valves are used in close proximity to the pump outlet or under frequent startup and shutdown conditions, in order to reduce the impact of excessive stretching and compression of the valve length on the pump and pipeline, limit devices should be added at both ends of the flange.
The flexible valve of "Anning end face fully sealed valve throat" must be selected with appropriate model according to the working pressure, connection mode, medium and compensation amount of the pipeline, and its number shall be selected according to the requirements of noise reduction displacement.
Deflection angle test:
The test can be conducted singly or after the axial and lateral displacement tests are completed and restored to the original state; Rotate the right angle baffle on both sides to deflect the sample to the deflection displacement angle specified in Table 2, and fix it. Apply the working pressure of the sample to the product at a pressure rise rate of 0.075MPa/s~0.175MPa/s for at least 1min, and check the sample for leakage, cracking, abnormal deformation and other damage;
Test results:
Observe and record whether the product has leakage, cracking and abnormal deformation within the time of maintaining the working pressure. When the soft valve is used near the outlet of water, oil and pump or under frequent startup and shutdown conditions, limit devices shall be added at both ends of the flange to reduce the impact of excessive stretching and compression of the soft valve length on the pump and pipeline.
The key to selecting "Anning end face fully sealed valve throat" is to see the quality. Shanghai Dongfeng Pump Valve Factory: 021-61551911 is a professional manufacturer specializing in the production of "tranquil end face fully sealed valve throats". It has 20 years of production experience and history. Its products are used in many key projects in China and are self operated and exported to the United States, South Korea, France, Spain, Brazil, Dubai, etc.
Anning end face fully sealed valve throat | end face fully sealed valve throat Dongfeng manufacturer